Mines, quarries, cement & concrete

Mines, quarries, cement & concrete

Make your equipment more reliable in the most demanding environments

RED combines predictive maintenance and energy optimization through electrical signature analysis (ESA). Installed in the electrical cabinet, a single sensor continuously monitors your rotating machines, away from dust, vibration and harsh production conditions.

Operational constraints in the mineral industry

Critical equipment under heavy stress

Dust, heavy loads, continuous operation or difficult access: in these industries, equipment is heavily stressed and drift can quickly affect overall production.

Critical equipment infographic 1

Heavy, harsh environments

Dust, heat, moisture, splashing and vibration subject equipment to particularly harsh conditions, which can be difficult for instruments installed directly on the machines.

Critical equipment infographic 2

Heavily stressed equipment

Machines often work under heavy load, with regular speed variations and abrasive materials that accelerate wear and put heavy stress on mechanical components.

Critical equipment infographic 3

Large sites and difficult access

Equipment may be spread over vast areas, located at height, at the bottom of a quarry or even underground, which complicates inspections, regular measurements and interventions.

Critical equipment infographic 4

Production continuity & energy

Drift in a critical piece of equipment is not just a risk of failure: it can also reduce throughput, degrade process performance and increase energy consumption.

RED in the mineral industry

Monitoring designed for your field constraints

RED moves the measurement into the electrical cabinet and monitors the whole machine from a single point, making it easier to track equipment that is scattered, exposed or heavily loaded.

Monitoring infographic 1d

Sensor outside the harsh zone

RED is installed in the electrical cabinet, away from the production area and protected from dust, shocks and other stresses.

Monitoring infographic 2d

A single sensor per machine

A single measurement point to monitor the motor and the driven load, keeping instrumentation to a minimum for a large machine fleet.

Monitoring infographic 3d

Mechanical, electrical and energy overview

RED combines these 3 types of data to provide a more complete and reliable picture of equipment health and performance.

AT EVERY STAGE OF THE PROCESS

What equipment can you monitor with RED?

Extraction, grinding, transport, ventilation, drying or mixing: RED covers the rotating equipment that is essential to the continuity of your operations.

Essential for dewatering, sludge transfer and various process circuits, pumps often operate in harsh conditions and sometimes far from easily accessible areas.
RED can in particular detect or track:

Cavitation and dry running

Misalignment and anchoring or coupling faults

Deviations in load or hydraulic operation

Blade damage or wear

Electrical faults and abnormal changes in consumption

INSENS 4

Use cases

Some real-world examples...

How to detect a voltage unbalance in a motor

In a quarry, an air blower feeds an industrial furnace. A voltage unbalance set in...

How to detect cavitation in a pump

In a quarry, two 110 kW dewatering pumps continuously empty a basin of rainwater...

Lubrication fault on a gearbox

In industry, some faults do not always cause an immediate failure. They gradually reduce the...

Anticipate failures and secure your production

Continuous monitoring to prevent critical failures and optimize energy performance.

Schedule your demo!

Book a 30-minute demo with our experts and see how INSENS detects the anomalies in your machines before they impact your production.

We will reply to you within 24 hours.

Download the use case PDF

Download the RED installation guide

Discover how to install the RED sensor quickly and without interrupting production.